3 Simple Ways to Make Skate Wax
Skating enthusiasts know that a smooth ride depends on good wax. Skate wax can improve the performance of skaters while also protecting their boards from scratches and damage. Despite being an essential skateboarding accessory, many often find skateboard wax to be a little expensive. Luckily, you don’t need to spend a fortune on store-bought wax when you can make your own at home. Here are three simple ways to make skate wax that will keep your board gliding effortlessly.
1. The Candle and Oil Method
Ingredients:
– 2 or 3 unscented candles or paraffin wax
– 2 tablespoons of vegetable oil or coconut oil
– Container or mold
Instructions:
1. In a heat-safe container, break the candles into smaller pieces or grate the paraffin wax.
2. Place the container in a saucepan filled with several inches of water, creating a double boiler.
3. Heat the saucepan over medium heat until the candles or paraffin have melted entirely.
4. Add the vegetable oil or coconut oil to the melted wax, stirring until well combined.
5. Carefully pour the mixture into your chosen container or mold.
6. Allow it to cool completely before removing it from the mold.
2. The Beeswax and Oil Method
Ingredients:
– 1 cup of beeswax pellets (or grated beeswax)
– 1/4 cup of vegetable oil, coconut oil, or olive oil
– Container or mold
Instructions:
1. Melt the beeswax using a double boiler setup, as mentioned in the previous method.
2. Once melted, add your choice of oil to the beeswax and stir until well combined.
3. Pour this mixture into your desired container or mold carefully.
4. Let it cool completely before using it as skate wax.
3. The Crayon and Vaseline Method
Ingredients:
– 8 to 10 crayons (use white or lighter colors for better results)
– 1/2 cup of Vaseline
– Container or mold
Instructions:
1. Remove the paper wrapping from the crayons and break them into smaller pieces.
2. Combine the broken crayons and Vaseline in a heat-safe container.
3. Melt the mixture using the double boiler method discussed earlier.
4. Stir the mixture until both elements have blended entirely, creating a smooth consistency.
5. Carefully pour your skate wax into your chosen container or mold.
6. Allow it to cool completely before removing it from the mold.
Now you’re ready to hit the skate park with your homemade skate wax! Be sure to test your DIY skate wax on a discreet area of any painted surface before using it all over your board, just in case. With these three simple methods, you’ll be able to save money and enjoy a smoother ride every time you hit the pavement.