How to Cover a Box Spring: 11 Steps
A box spring is a crucial component of your bed’s support system, but it can also be an eyesore when it doesn’t match your bedroom decor. Covering your box spring is an easy and effective way to improve the look of your bed and add a touch of elegance to your bedroom. This article will provide you with a simple, step-by-step guide on how to cover a box spring.
1. Measure your box spring: Using a measuring tape, measure the length, width, and height of your box spring to ensure you have the correct dimensions when choosing or creating the cover.
2. Choose a fabric: Pick a fabric that complements your bedroom decor and is durable enough to withstand everyday wear and tear. Examples include cotton, linen, or polyester.
3. Calculate fabric yardage: Based on the measurements obtained in step 1 and the desired drop (the distance from the top of the box spring to the floor), determine how much fabric you will need for the project. Don’t forget to factor in extra fabric for seams and hems.
4. Purchase necessary materials: In addition to fabric, gather other essential items such as scissors, sewing pins or clips, measuring tape, a sewing machine or needle and thread, and an iron.
5. Cut out fabric pieces: Lay out your fabric on a clean, flat surface. Cut out pieces using the measurements obtained in step 1, adding an allowance for seams and hems.
6. Sew side panels together: Starting with two of the long side pieces, place them right sides together with edges aligned and sew along one long edge using a straight stitch. Repeat this process with the other long side pieces.
7. Attach top panel: With right sides together, pin or clip one short edge of the top panel to one of the sewn long side panels. Sew them together using a straight stitch. Repeat this process on the opposite short edge of the top panel, attaching it to the other long side panel.
8. Close the final side seam: Align the remaining long edges of the side panels, pin or clip, and sew them together using a straight stitch.
9. Create a hem: Fold over the bottom edge of the box spring cover to create a 1-inch hem. Press with an iron, being careful not to burn the fabric. Using a sewing machine or needle and thread, sew along the entire hem.
10. Insert elastic (optional): If you would like a more secure fit for your box spring cover, insert elastic into the hem. Cut a piece of elastic that is slightly shorter than the perimeter of your box spring cover’s bottom edge and thread it through the hem using a safety pin or bodkin—the elastic will gather the fabric for a snug fit.
11. Place cover on box spring: Lift your mattress off of the box spring and slide your newly made cover over it. Adjust as necessary to ensure proper fit and alignment.
Now that you know how to cover a box spring in 11 simple steps, you can enjoy a beautifully coordinated bed that adds style and sophistication to your bedroom. Happy sewing!