3 Ways to Remove a Door Handle
Introduction
A door handle is a crucial component of any door, serving both functional and aesthetic purposes. Over time, a door handle may wear out or become damaged, necessitating its removal and replacement. Removing a door handle is a simple process that doesn’t require any professional help. In this article, we will discuss three different ways to remove a door handle.
1. Removing a Door Handle with Visible Screws
If the door handle you are working with has visible screws, this method will be the most straightforward one to use.
Tools you will need:
– Screwdriver (either Phillips or flathead, depending on your door handle)
– Needle-nose pliers (optional)
Step-by-step guide:
1. Examine the door handle to determine what type of screws are used.
2. Select the appropriate screwdriver.
3. Unscrew both screws from the face of the door handle.
4. Gently pull the knobs on both sides of the door away from each other to reveal an additional screw on the sides.
5. Use a screwdriver to remove these side screws.
6. After removing all screws, pull the interior and exterior knobs away from the door.
7. Use needle-nose pliers (if necessary) to detach any remaining portions of the mechanism.
2. Removing a Door Handle with Hidden Screws
In cases where your door handle does not have clearly visible screws, they might be hidden under cover plates.
Tools you will need:
– Screwdriver (either Phillips or flathead)
– Flat-head tool/Small pry bar
Step-by-step guide:
1. Examine the door handle for any concealed cover plates.
2. Use a flat-head tool or small pry bar to carefully remove the cover plate and expose the hidden screws.
3. Once the screws are exposed, use an appropriate screwdriver to unscrew them.
4. Pull away both interior and exterior knobs and remove any remaining parts of the door handle.
3. Removing a Door Handle with No Screws
Some door handles don’t use screws for attachment. In such cases, you need to follow a different approach.
Tools you will need:
– Flat-head screwdriver
– Allen wrench (depending on the door handle)
Step-by-step guide:
1. Check the door handle for a small hole or slot, usually located on the shaft connecting the knob to the door.
2. If there’s a hole, insert an Allen wrench into it and turn it counterclockwise until it releases the set screw.
3. Pull the knobs apart gently to remove the door handle from the door.
4. If there’s a slot instead, insert a flat-head screwdriver and gently push a hidden release mechanism.
5. Apply pressure while pulling the interior part of the handle away from the door to disengage it.
Conclusion
Removing a door handle is an easy process, regardless of its design or attachment method. With just a few basic tools and following these simple steps, you can remove your old or damaged door handle without having to call in a professional. Remember always to use caution and take your time when working to prevent damage to your door or injury to yourself.