How to Change a Crank: 13 Steps
A bike’s crank is an essential component allowing for the transfer of your pedaling power into forward motion. Over time, the crank can wear out or become damaged, necessitating a replacement. In this article, we will guide you through the process of changing a crank in 13 easy steps.
1. Gather your tools: Before starting, ensure you have all the necessary tools and equipment, including a new crankset, a crank puller tool, an appropriate-size wrench and Allen key set, and grease.
2. Position your bike: Make sure your bike is in a stable position, either on a bike stand or upside-down, ensuring easy access to the crankset.
3. Remove the pedals: Use the appropriate-size wrench to remove both pedals by turning them counterclockwise.
4. Loosen the crank bolts: Using an Allen key, loosen the bolts on each side of the crank arms (left and right).
5. Thread the crank puller onto the crank arm: Ensure that the tool’s threads are properly aligned with those of the crank arm to avoid stripping.
6. Tighten the inner part of the crank puller: Hold onto the outer shell while tighting clockwise until resistance builds up.
7. Remove the crankset: Continue turning the puller to effectively separate both left and right arms from your bottom bracket spindle.
8. Clean and inspect bottom bracket: Wipe away any debris from around the bottom bracket area using a cloth or brush, and inspect for signs of wear or damage.
9. Apply grease: Apply grease evenly to both ends of your new crankset where they will connect with bottom bracket’s spindle.
10. Install new crankset: Slide one side (drive side) onto spindle and tighten using Allen keys without fully securing it yet. Do not forget to ensure proper chainring orientation before proceeding further.
11. Repeat process for non-drive side: Install the non-drive side crank arm, ensuring proper orientation and alignment with the drive side. Tighten until snug.
12. Secure both crank arms: Tighten both sides fully, following manufacturer-specific torque recommendations if possible.
13. Reattach pedals: Finish by re-installing your pedals, turning clockwise to tighten securely.
Now that you’ve successfully changed your bike’s crank, enjoy your smooth and efficient ride! Remember to inspect and maintain your bike regularly to keep it in optimal condition for countless journeys to come.